Gift Card Envelope - DIY Tutorial

My mom always says that gift cards are impersonal. I disagree. I love gift cards. I love how easy it is to give them and I love getting them and spending them. Its like guilt-free shopping. When we got married we got so many gift cards and it was awesome! We were able to get so much stuff that we needed, even stuff that wasn't on our registry.

The only thing I don't like about gift cards is that they are impossible to wrap and the little envelopes they come in are ugly. There are some cute cards and little tins you can get to put your gift cards in, but who wants to pay extra for that?

So, my solution is to make my own little envelope! It only takes a little scrap of fabric and about 30 minutes to make.

What you will need:

• One piece of fabric (quilting cotton works really well) - 13" x 3.5"
• The usual stuff (a sewing machine, matching thread, scissors, an iron, etc...)

Fold the fabric in half length wise, right-sides together. Stitch around the three raw edges using the edge of the foot lined up with the edge of the fabric as a seam allowance, back-tacking and leaving a hole for turning. 

Cut the corners, being careful not to cut the threads.

Pull the fabric though the hole so that its right sides out. Poke out the corners with a corner-turner (or a dull pencil).

Fold the raw edges from the turning hole to the inside. Press all the way around, making sure that the seams are pushed all the way to the edge.

Stitch along the edge of the envelope to close up the hole that was left for turning. I did two lines of stitching, one using the edge of foot, edge of fabric and one as close to the edge of the fabric as I could get. If you want you can just stitch as close to the edge of the fabric as you can.

 

Fold up one half of the envelope 2 and 7/8" to form a pocket. Press and pin.

Stitch around three edges as close to the edge of the fabric as you can. Make sure to back-tack. 

Slip in a gift card and you're DONE!

Paintbrush Roll-Up (tutorial) - DIY Easy Sewing Project

My sister, Annie, is way cooler than me. She is four years younger and ever since she was able to be awesome she was as awesome as awesome is. I mean she had three Halloween costumes this year: Frida Kahlo, Max from Where the Wild Things Are, and Davis Bowie. I mean if thats not awesome, I don't know what is!

 

Annie is an amazing artist. She is an art major and one of her favorite mediums is painting. I have been meaning to make her some art supplies totes and cases. I want to make her a pencil case, a bag, a sketch book cover, a colored pencil roll-up, and so many other things! At the rate I'm going she will be graduated and on to living her awesome life before I get any of it made.

For Christmas I made her this awesome Paintbrush Roll-Up. Its really easy, a perfect beginning sewing project. It doesn't take a lot of fabric and can be put together in an afternoon.

Confession: Every once in a while (read: more often than I would like to admit), when I make up my own patterns, I have moments of sheer stupidity. With this project it was that I totally forgot to cut two pieces for the main body of the roll-up. It was a moment of "OMG! Corey, what were you thinking?" Thankfully, this was not a big oops, easy to fix, just cut one more piece of fabric. The only fabric I had that matched the other fabrics was a scrap from another project, so I stitched up the scrap and went with it. The only problem I had with this scrappy fabric was that it had a slight stretch. I would not suggest using anything with stretch.

Paintbrush Roll-Up
What You Will Need:

• two pieces of fabric cut to 22" x 19"
• one piece of fabric cut to 22" x 2.5"
• two pieces of fabric cut to 18" x 2.5"

Fold each 18" x 2.5" (the long skinny pieces) in half right sides together. Stitch up the long sides using a 1/4" seam allowance. Hook a safety pin in one end of one of the tubes, feed the safety pin back through the tube until it comes out the other end. Keep pulling the tube thought itself so that its all right-side-out.

Fold one end of the tubes inside and stitch it up. 

Pin the 22" x 2.5" piece along the right 22" side of the main piece, right sides together. It should be 1" from the edge. Stitch along the right side edge of the 22" x 2.5" piece. Fold and press the 22" x 2.5" over so that the right side of the fabric is on the right side.

Layer the two large pieces of fabric on top of each other with right sides together. Pin the tie strips, with the unfinished ends stitching sticking out and the strips on the inside of the sandwich. Make sure you leave a hole for turning, I make this with thee pins as I did in the picture. Using a 1/2" seal allowance stitch around the outside edge of the sandwich, leaving that hole for turning. Trim the corners. 

Pull the sandwich through itself so its right sides out. Press. Fold the raw edge that was left for turning to the inside and pin. Fold up the bottom (the 18") edge 5", pin in place. This is what will create the pocket for the paintbrushes. Top stitch around the edge of the whole roll-up, using the edge of the presser foot lined up with the edge of the fabric as a seam allowance.

Using chalk or a washable fabric marker marker the stitch lines for the pockets. These lines should run the full length of the roll-up. The lines can be the same width or various. I made the pockets varied from 3/4" to 2" wide. Stitch along these lines from top to bottom. Make sure you don't catch the ties in the process. Brush off the chalk or use a damp cloth to gently rub it off. 

Add paintbrushes (or pens, pencils and markers) and fold over the top edge (should be about 4").  Roll up the case and tie  it off. There you have it! Good to go to art class!

I just LOVE the way this turned out! I can't wait to give it to my sister. She will have many more paintbrushes than I do to fill it with. I am sure she will love this as much as I do. Yay for easy sewing projects that turn out so wonderfully!

Here are some more photos to show how great this project is.

 

P.S. This is perfect for pencils, colored pencils, markers, a highlighter collection, pens, crochet hooks, short knitting needles, etc...

Audrey Sunglasses Case (Tutorial)

I have needed a sunglasses case for years. I generally just toss my sunglasses in my purse or beach bag and they end up getting all scratched and smudgy. And who else to grace the front of a sunglasses case than the elegant lady who wore the shades so very very well?

Here is my tutorial for the Audrey Sunglasses Case.

Enjoy.

Create.

Share.

Audrey Sunglasses Case Tutorial

What you will need:

For the case:

• 9"x9" square of quilting cotton ("grey fabric")
• 9"x9" square  of quilting cotton ("multi fabric")
• 9"x9" square  thin cotton quilting batting ("batting")
• 1" squares of male and female Velcro
• Drinking glass or something with a round with a  2 3/4" diameter (doesn't have to be exactly 2 3/4" diameter, that's just the size I used) 
• The Usual Stuff (sewing machine, hand sewing needle, fabric scissors, paper scissors, straight pins, matching thread, rotary cutter and mat, square ruler, etc...)

Wash and press all fabric before using (just in case it shrinks)

Cut out pieces according to the measurements, or use a rotary cutter and square ruler. (Check out this tutorial for using a rotary cutter). 

Use the drinking glass to draw a half circle in two opposing corners, about 1/2" from the edge of the fabric. This is one of those cases where you should use tailors chalk, but I found that using a pencil was much easier because I could get much closer to the edge of the glass.

Layer the grey and multi fabrics (right sides together and matching up the edges), layer the cotton batting on top of this stack. Pin.

Stitch 1/2" seam alowance around the edge and along the rounded line you drew from the drinking glass. Leave a opening for turning on the opposite edge from the curved edges and in the middle of the squares.

Trim seams to about 1/8" all the way around except the unstitched opening for turning, leave this alone.

Turn the whole thing right sides out. Press very well, making sure to press the raw opening edges to the inside.

Pin the Velcro squares 1/2" from the top of the pouch (the side with the curved edges) and roughly 3" apart. Stitch around the edges of the Velcro and in an X across the square.

This is when you should stencil on your design, skip down to the bottom of the tutorial to find instructions of making an painting a stencil.

Fold the case in half with the multi fabric on the inside. Pin along the outside edge up to where the curve starts. Make sure the raw edges of the opening are not poking out.

Stitch right along the edge of the case, starting at the bottom of the curved edge and going along to the folded edge. 

Audrey Stencil Tutorial

What you will need:

For the stencil:

• Printer paper
• Transparency film
• Fine-tip marker
• Xacto knife and blades (always use a new blade for every new project you start)
• Self healing cutting mat
• Paper Scissors
• Masking tape
• Fabric paint
• Paint sponge

Print out the image onto regular printer paper. The image should measure roughly 4 1/2" x 4" when printed. (I printed mine onto scrap paper, that's why it has writing and other things in the background. Go green :).

Trace over the image with a marker to make sure you know where you are supposed to be cutting. 

Cut out the image and tape it to the cutting mat.

Tape a sheet of transparency film over the image. Make sure there is plenty of room around the image. I usually leave at least 3" around the image that I will be making into a stencil. That way you can be sure that there is no issues when painting. 

Use a sharp Xacto knife, cut out the area of the stencil that you colored with the marker. Continue cutting until the whole image has been cut out.

Test the stencil by placing it over a piece of scrap paper. Make sure not to brush the paint onto the stencil. Dabbing in and up and down motion is the best method. 

If you need to this is the time to make changes or slight adjustments to your stencil.

Tape your stencil in place on the case. Dab on the paint in an up and down motion. 

Remove the stencil and save for use on future projects.

A note on stencil images:

Find an image that you want to use, I chose this really great Audrey Hepburn image because it is simple and pretty much ready to go. If you want to find a different image try Googling things like "flower stencil," or "bird stencil," also using the terms "vector" or "clip art" can result in some really great stencil-ready images.

If you find an image that is not already a stencil then you will have a little more work ahead of you. It is easiest to just use images that are supposed to be stencils. If you fall in love with an image that is not already a stencil image then try to use something that is in black and white with clear lines. Remember that free floating doesn't work with stencils, there have to be connecting piece, so you may have to add these connectors.

I hope you are inspired to make your own sunglasses case. 

Let me know what you think of mine.

If you make one please share your thoughts on the tutorial and send me some pictures of your project.

Xoxo and Happy Stitching!

Corey